Description
Package Includes:
- 1x ATEM POWER 20A DC-DC Charger
- 1x Manual
Warranty:
1 Year Warranty
| Type: | Multi Stage |
| Input: | DC Battery: 12.5~16.0Volts
Solar Input: 16.0-25.0 Volts |
| Output/Charging Voltage: | 14.4~15.4 Volts(Stops charging when alternator output or vehicle battery below 12.5 volts) |
| Output Current: | DC Output: 20A
Solar Output: 20A |
| Minimum Start Voltage: | 2.5 Volts-For battery being charged |
| Soft Start: | Yes |
| Soft Charge Current: | DCDS20@20A |
| Bulk Charge Voltage: | 14.7V(AGM/Gel)14.4V(Lead Acid)15.4V(Calcium)14.4V(LiFePO4) |
| Absorption: | Constant voltage with automatic amperage control |
| Equalisation: | Automatic |
| Float Charge Voltage: | 13.5V(AGM/Gel)13.5V(Lead Acid)13.5V(Calcium) |
| Float Charge Current: | 100mA |
| Battery Range: | 60 to 600Ah |
| 0-1 Metres: | 12AWG |
| 1-5 Metres: | 8 AWG |
| 5 metres+: | 6 AWG |
| Input: | DC Battery: 12.5~16.0Volts
Solar Input: 16.0-25.0 Volts |
| Output/Charging Voltage: | 14.4~15.4 Volts(Stops charging when alternator output or vehicle battery below 12.5 volts) |
| Output Current: | DC Output: 20A
Solar Output: 20A |
| Minimum Start Voltage: | 2.5 Volts-For battery being charged |
When you cannot access main power while off-grid camping, a 12V 20A DC to DC Battery Charger from ATEM POWER will be your ideal companion for a dual battery setup. This device, which is made to perform a full charge cycle with the option to select Lead Acid, AGM, Gel, Calcium, or LiFePO4 batteries and apply the proper charging profile to increase their lifespan, also includes a Re-selection Ready mechanism that enables you to change the battery while it is charging by holding down the “POWER” key for a long time. When everything is set up, it can be connected indefinitely! A number of safeguards are also built into the battery to keep it safe, particularly in the event of an unintentional terminal misconnection.
Features
- Dual Input: This 12V 20A DC to DC Battery Charger is made to efficiently draw electricity from a solar panel (up to 20A) or the alternator of your car in order to recharge your auxiliary battery.
- Integrated Multi-Stage Charging: This 12V 20A DC to DC Battery Charger combines standby, pre-charge, constant current, constant voltage, full charge, and re-charge.
- ATEM POWER’s 12V 20A DC to DC Battery Charger is compatible with a variety of batteries, including lead-acid, AGM, gel, calcium, and LiFePO4 batteries.
- Built-in MPPT Regulator: The regulator in this 12V 20A DC to DC Battery Charger is intended to increase the amount of energy the solar panel can produce.
- It integrates multiple types of protection, including input/output reverse polarity protection, input/output overload, over-temperature, short circuit, and multiple types of charge.
- Internal Temperature Monitoring: By effectively defending the circuit board, this mechanism can increase the 12V 20A DC to DC Battery Charger’s lifespan.
- Strong Construction: Strong aluminum housing is built to withstand harsh environments, and quality wires are used in this 12V 20A DC to DC Battery Charger for long-lasting durability.
- New Charging Algorithm: This algorithm is intended to pick the best charge mode and recharge your discharged battery.
- Compatible with smart alternators: For modern vehicles, trailers, and caravans, the ACC wire can be connected to the ignition to adjust voltage cutoff.
- User-Friendly Design: The memory function is integrated to make charging more practical, and the 12V 20A DC to DC Battery Charger’s LED indicator shows the charging stage in real-time.
- Please take note that the user manual for a product might be for an older version; instead, always refer to the wiring diagram in this listing for the most recent wiring setup.
